BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Start and stop the vehicle

Start and stop the vehicle 103 Install in the order opposite to that of dismantling. During installation, the rear roof shall be flush with the vehicle body (or slightly lower than 1mm). Front windshield overturned In addition to the removable top cover, the front windshield can also be turned forward on the engine hood, allowing you to enjoy real outdoor driving fun. If the front windshield is folded, a series of disassembly and assem­ bly operations are required. During disassembly and disassembly, many specialized tools and parts are used and the operator is required to have some relevant experience.

Improper operation can easily cause damage to vehicle components, and even cause personal injury in severe cases. There­ fore, we strongly recommend that you conduct relevant operations after con­ sulting a Beijing Auto dealership. WARNING WARNING 2 The disassembly and assembly of the rear top cover shall be carried out with the help of professional tools. How­ ever, improper operation may cause damage to vehicle components. Or un­ predictable problems occur due to un­ reasonable assembly. In severe cases, it will also lead to personal injury, so we strongly recommend that you carry out relevant operations after consult­ ing the authorized dealer of BAIC.

The front windshield can prevent the intrusion of flying stones, branches, and other objects on the road, espe­ cially in some traffic accidents. There­ fore, please do not drive on the road when the front windshield is folded forward and overturned on the engine hood. Attention If you want to feel the driving feeling with the front windshield tipped forward, securely fasten the windshield to the engine hood after the windshield has tipped forward on the engine hood. Fasten your seat belt before driving. It is recommended that the speed should not exceed 16km/h and keep driving in a low gear.

Before returning to normal driving, please restore the front windshield to its original position and install all parts. During the disassembly process, the dismantled parts must be properly placed in a safe place to prevent loss or damage to the parts, or danger to personnel. WARNING