BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Start and stop the vehicle

Start and stop the vehicle 104 The specific disassembly steps are as follows: 1. Remove the front roof as described in 2. First, pull out the sunvisor rotating shafts on both sides in the direction of - arrow A-, remove the 2 locking screws - arrow B-, and finally remove the two front sun visors (the picture here takes the right side of the vehicle as an example). the "Front Roof" section and place the front roof and its securing bolts in a safe place to prevent damage or danger. 2 1 B B 3. Remove the locking screws on both A 1 sides -arrow -, and then remove the windshield corner trim panels -1- on both sides.

(the picture here takes the right side of the vehicle as an example) Attention The tree-shaped buckle on the interior panel is a disposable part and needs to be replaced with a new one after disas­ sembly.