BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Start and stop the vehicle

Start and stop the vehicle 105 5. Loosen the A-pillar audio plug. 6. Release the front windshield antenna 1 plug, which is located in the dashboard on the front passenger's side. 2 4. Remove the upper cross beam trim panel of the wind window-1-shown in the figure. First remove the A-pillar trim panels on both sides, and then release the plug shown in the figure (the picture here is on the right side of the vehicle as an example). Attention First remove the glove box on the passenger side: open the glove box and slowly pull out the glove box in the direction of the arrow shown in the figure.

The upper crossbeam trim panel of the windshield is fixed by 10 fasteners, which are disposable parts and need to be replaced after disassembly. Attention The A-pillar trim panel is connected by a disposable fastener and needs to be replaced with a new one after disas­ sembly.