Start and stop the vehicle 106 8. Remove the wiper arm. 2 B Locate the windshield antenna plug and loosen it as shown in the figure (the plug is not fixed inside the glove box). 7. Remove the fastening bolts connecting A the front windshield and the left and right anti-roll bars in the illustration, there are 3 fastening bolts on each side, a total of 6 (the picture here takes the right side of the vehicle as an example). Open the wiper arm nut protective cover in the direction of arrow B as shown in the figure, and remove the fixing nut - arrow A-. Both wiper arm fixing nuts should be removed (the right wiper arm is taken as an example in the figure).
These bolts have a torque requirement of 24±2N·m when installed. Attention Attention The wiper arm fixing nut has a torque requirement of 19±1N·m during instal lation.