Car lights and visual field 125 Front windshield wipers (without auto matic wipers)* AUTO (intermittent wiping) and continu ous wiping* Front windshield cleaning Move the right multi-function control lever in the direction of arrow C as shown in the figure (toward the driver's arms), the windshield washer nozzle will spray the windshield cleaner, and then the wiper will automatically cycle for several times. If the one-button start switch is turned off during the cleaning of the windshield washer, the wiper will continue to operate until it stops after returning to its original position.
In the wiper cleaning mode, if the position of the right multi-function control lever is changed, the wiper will carry out the corresponding function. The exception is: if the intermittent wipe mode is selected, the wipers will not start to enter the intermittent wipe mode until the corresponding wiper cleaning mode has been completed. At the end of the wiper cleaning cycle, if the wiper control lever is at any position except "off", the wiper will continue to execute the corresponding mode after completing the wiper cleaning cycle. The controls for the windscreen wipers are located on the right-hand multifunction lever behind the steering wheel.
In the "OFF" position, press the right multi-function control lever in the direction of arrow B- to 1 gear, the windshield wipers are in the AUTO gear, and the wiper speed is automatically adjusted according to the amount of rain (some models do not have an AUTO gear, which is Intermittent wiping); press down the 2nd gear to start low-speed continuous wiping; press down the 3rd gear to start high-speed continuous wiping. 2 A C B INT gear * When the control lever is turned to "INT", the front wiper will be in intermittent wip ing state (this function is only available for specific vehicle configurations, and some vehicle models are in automatic mode).
Inching and wiping LO In the "OFF" position, push the right multi-function control lever in the direction of arrow a as shown in the figure to realize the inching and wiping of the front wiper, that is, operate the control lever once and the wiper will wipe once. After the push-up action is completed, the control lever will reset automatically. When the control lever is turned to "LO", the front wiper wipes slowly. HI When the control lever is turned to "HI", the front wiper wipes quickly.