Car lights and visual field 126 Rear windshield wiper 1 It is forbidden to use wiper when the windshield is dry. Under low temperature or hot con ditions, ensure that the wiper blade is not frozen/bonded or fixed on the windshield before wiper operation. In winter, snow and ice should be removed from the wiper arms and wipers, including areas where wip ers operate. Attention 1 2 2 3 Intermittent wiping frequency As shown in the figure, turn the end posi tion -1- of the right control lever to control the intermittent wiping frequency of the windshield wiper. Rotate upward (clockwise) to reduce the frequency, and downward (counterclockwise) to increase the intermit tent wiping frequency.
The figure shows the rear windshield wiper control component, which is located on the right multifunction lever. There are several switch positions as follows: 1. Cleaning of rear windshield. When the control lever is rotated to position -1-, the windshield cleaner is sprayed to the rear windshield by the rear windshield washer nozzle, and then the rear windshield wiper will automatically cycle for several times. The control ring will reset automatically after release.