Seats and storage facilities 139 Rear-row seats After adjusting the seat position, try sliding the seat back and forth to make sure it is locked in place. Push the upper part of the seat back back and forth to ensure that the seat back is firmly locked, oth erwise it may interfere with the nor mal operation of the seat belt. Do not place objects under the driv er's or front passenger seat, which may interfere with the seat locking mechanism or accidentally push the seat position lever upwards causing sudden seat movement, which are especially likely to result in loss of vehicle control while driv ing. Attention The seat position set by the manu facturer:
the front and rear adjust ment stroke is 240mm, and the seat design position can be adjusted forward by 200mm and backward by 40mm; The design position of the driver's seat can be adjusted upward by 20mm and downward by 25mm; The design angle of the front backrest is 22°, and the design position can be adjusted backward by 50° and forward by 25°; The headrest with 4-way ad justment can be adjusted forward and backward in 3 levels of about 26mm. Attention Rear-row seat folding This vehicle is equipped with rear-row 4/6 split seats. If you need to place bulk items in the rear-row seats, you can fold and flip the rear-row seat backs.
2 WARNING Do not adjust the seat during driv ing because the unexpected shift of the seat is liable to the out-of- control of the vehicle. Adjust the seat so that it does not hit the passenger or luggage. As shown in the above figure, pull up the two folding buckles of the rear-row seat back to control the seat reclining function of the left or right rear respectively.