BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Seats and storage facilities

Seats and storage facilities 140 Fold the seat back into full contact with the seat cushion. Then, turn the seat upward and forward to the limit position to turn the rear seat over. When the seat on one side turns over twice, stick the seat belt buckle to the felt on the side of the seat on the other side. The advanced 4/6 split seat can meet different space requirements on both sides, so as to meet the living load. When restoration is required, reverse the sequence. After restoration, push the seat to confirm whether the seat is fully locked and fixed. Design requirements for backrest angle: The design angle of the backrest is 23 °, which can be adjusted forward by 4 ° and backward by 10 °.

Tip 2 Before folding the rear-row seats, it is necessary to adjust the front-row seat position to ensure the folding space of the rear-row seats. Overturn Pull down the seat strap under both sides of the seat as shown in the figure, and then turn the seat up. Tip Push the upper part of the seat back back and forth to ensure that the seat back is firmly locked, otherwise it may interfere with the normal operation of the seat belt.