BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Starting and Driving

Starting and Driving 150 Starting and Driving Start/Stop button (Mode II)* When the button is pressed for the first time: the "RUN" mode is turned on, the meter lights up, and all electrical equip­ ment such as the display screen are on; When the button is pressed for the sec­ ond time: "ACC" mode is turned on, and accessory circuits such as radio and cigarette lighter are connected. The third time the button is pressed, it returns to "OFF" mode. Press the engine start/stop button succes­ sively to switch circularly among the three modes of "OFF," → "RUN," → "ACC".

Steering system Start/Stop button (Mode I)* 4H 4H 2H 4L 2H 4L START ENGINE STOP 3 S START ENGINE STOP M The start/stop button is located in the center of the A/C vents in the center console. Power Mode Switch: Automatic transmission models: Put the shift lever in the P or N position, when the brake pedal is not pressed; Manual transmission models: When the clutch pedal is not pressed; Press the start/stop button, the power mode will be switched in the following order: Do not hold the steering wheel in the dead position (turn left or right) for more than 15 seconds, which will damage the power steering system.

For users in cold regions with ambient temperature lower than -20 °C, it is recommended to use pandongxing hydraulic transmission oil CHF 202 power steering fluid.