BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Starting and Driving

Starting and Driving 153 Vehicle starting Shut down the engine. Do not start or run the engine in a poorly-ventilated place or closed space. Otherwise, the colorless, odorless and poisonous exhaust gas will cause personal coma or even suffocation. When the engine is running, do not leave the vehicle alone without su­ pervision. Do not start the engine with any auxiliary starting device. Doing so can cause explosion or the engine to race, resulting in personal injury or death. To prevent damage to the starter, do not start the engine for more than 10 seconds each time. Wait for 10 to 15 seconds before starting the next time. WARNING The idle speed is related to the engine coolant temperature.

The engine idle speed gradually decreases to the normal idle speed as the coolant temperature increases. In cold weather, it may take a long time for the engine to drop from high idle speed to low idle speed. If you want to start at high idle speed, you should run the engine for at least 15 seconds before starting. At the same time, the speed of releasing clutch pedal or brake pedal should not be too fast to prevent the vehicle from suddenly rushing forward and causing accidents.

Stop the vehicle, apply the parking brake, put the shift lever in neutral, and the automatic transmission model should be in P, release the brake or clutch pedal, press the start/stop button, and turn off the engine. The start/stop button is placed in the "ACC" position and the engine will stop. 3 After running under heavy load, it is recommended to let the engine run at idle speed for a few minutes before shutting down. This allows the cooling system to continue working to lower the temperature of the engine. Attention