BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Starting and Driving

Starting and Driving 152 Emergency shutdown function Automatic transmission models Press the brake pedal to the bottom and hold it; Place the shift lever at the P or n posi­ tion; Press the start / stop button once to start the engine. Diesel engine models: After entering the vehicle, press the start / stop button once, and when the conditions are met, the instrument en­ gine air intake preheating indicator will light up; After the preheating indicator is off, start the vehicle according to the above man­ ual or automatic transmission models. When the normal mode cannot stop the engine, the emergency shutdown mode can be used.

Step on the brake, press the start/ stop button twice within 2s or long press the start/stop button for 2s to stop the engine. Start the engine. If the engine does not start suc­ cessfully within about 10 seconds, release the start / stop button, wait for 10 to 15 seconds, and then re­ peat the normal start procedure. If the vehicle fails to start success­ fully for many times, please go to the authorized dealer of BAIC to check the vehicle to eliminate the fault. Tip 3 Start the engine by the start/stop button. When the smart remote key is within the effective detection range, the starting method of the model equipped with the start/stop function is as follows: Manual transmission models:

Press and hold the clutch pedal to the bottom; Place the shift lever in the neu­ tral position; Press the start / stop button once to start the engine. Attention When starting the cold engine, be­ cause it takes several seconds for the engine oil to reach the normal working pressure, running noise may occur. This is a normal phenomenon, so there is no need to worry.