Starting and Driving 155 Recommended driving speed (gasoline model) Correct operation of manual transmission When the vehicle is running or the engine is idling, do not step on the clutch pedal to avoid overheating or even damage to the clutch. Do not use the "half-clutch" method to stop the vehicle on a slope to avoid damaging the clutch. The clutch should be fully depressed when shifting gears to avoid damage to the transmission or clutch. When the vehicle is stuck and needs to be impacted by shifting the forward gear and the reverse gear, the vehicle speed should not exceed 25km/h to avoid damage to the drive train.
Shift with gentle force, and do not use excessive force to prevent damage to the transmission gears. Do not put your hand on the shift lever all the time during the driving of the vehicle to avoid premature wear of the shift fork. When shifting from forward gear to reverse gear, or from reverse gear to forward gear, it must be done when the vehicle stops completely, so as not to damage the transmission. Do not use low-speed driving for a long time, so as not to reduce the engine life. When the vehicle is driving at high speed in a certain gear, do not force it to change into low gear, so as not to damage the engine or transmission.
When slowing down or going uphill, don't overload the engine or drive too slowly in a certain high gear. You should shift into low gear according to the speed requirements to avoid overheating of the engine. 3 Recommended driving speed (diesel model) Don't slide in neutral when going downhill, and don't turn off the en gine. The speed should not be too fast when reversing.
WARNING Gears Vehicle speed (km/h) Normal driving Acceleration driving 1st gear 5-20 0-30 2nd gear 15-40 20-60 3rd gear 30-70 40-100 4th Gear Above 50 70-150 5th gear 70-140 — Gears Vehicle speed (km/h) Normal driving Acceleration driving 1st gear 5-20 0-30 2nd gear 10-40 20-60 3rd gear 30-70 40-100 4th gear Above 50 70-150 5th gear 60-120 — 6th gear 70-140 —