BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Starting and Driving

Starting and Driving 156 Push the gear lever to the reverse gear Driving description Automatic transmission model II * Automatic transmission model I* When the engine is running, the clutch pedal should be pressed to the bottom before shifting into reverse gear, and then the shift lever should be shifted into reverse gear after a pause, otherwise the gear collision sound will be generated when shifting into reverse gear. Once shifting into reverse gear, the reversing indicator light will light up, the instrument will send out a prompt sound, and the the backup sensor system will start to work.. For information on the backup sensor system, see "Backup Sensor System" on page 181.

P R N D 3 The shift control mechanism of the automatic transmission model I is a mechanical stepped shift type. You can refer to the gear prompt on the shift panel to perform the shift operation in the specified direction. The shift control mechanism of the au­ tomatic transmission model II is an elec­ tronic bistable self-reset shift type, and the shift operation can be performed in the specified direction by referring to the gear prompt on the shift handle. WARNING The reverse gear can only be en­ gaged after the vehicle has stopped steadily.

For manual diesel vehicles, the reverse gear lifting device is under the shift ball head, and should be lifted before shifting into reverse gear, and the re­ verse gear position should be selected before shifting into reverse gear. Tip