BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Starting and Driving

Starting and Driving 157 Gears description of Automatic transmis­ sion model I "P" gear (parking gear): Only after the vehicle is completely stopped and the brake pedal is fully de­ pressed can the "P" gear be engaged or moved out. The automatic shift operating mech­ anism has a "P" gear lock structure, which means that the gear can only be moved out of the "P" gear when the brake pedal is depressed and the vehicle is powered on or the vehicle is powered on, and the shift lever's unlock button is pressed.. "R" gear (reverse gear):

When entering the "R" gear, make sure that the vehicle has completely stopped; From the "P" gear or "N" gear into the "R" gear, you must step on the brake pedal to the bottom and press the unlock button of the shift handle before you can enter the "R" gear; When the gear is in "R" gear, the reversing light will come on automatically. "N" gear (neutral gear): When the vehicle is completely station­ ary and the engine needs to be idle for a short time (such as waiting for traffic lights), the "N" gear can be selected. When the gear is in neutral, the trans­ mission is not locked, and the parking brake must be used or the brake pedal must be pressed. "D" gear (driving gear):

Use this position for your normal driv­ ing. The transmission automatically shift up or down according to the engine load and the vehicle speed. "M" gear (Manual transmission): When the shift lever is shifted from "D" to "M", the transmission enters manual mode. By pushing the shift lever back and forth, the driver's desired gear is shifted, and the dashboard displays the corresponding target gear. Gears description of automatic transmission modelI (See page 160.) Shift lever position and status: The shift lever has two steady-state positions, which are the center position and manual mode position respective­ ly, and the rest positions are transient. (Note:

Steady-state position refers to the position where the shift lever can be stabilized; transient position means that the shift lever can be pushed to this po­ sition by hand, but it will automatically return to the steady-state position when the shift lever is released.) When the shift lever is located in the center position, tPush forward has two transient positions, which are the first order and the second order in turn; Pushing back also has two transient po­ sitions, first order and second order.

When the selector lever is in the center position, push it to the right to the man­ ual mode position, push the manual mode position forward to have a tran­ sient position, push it backward also has a transient position, and push the manual mode position to the left to re­ turn to the center position. When the front and rear first-order and second-order shift operations are car­ ried out, the automatic transmission will shift to the adjacent first gear in the cor­ responding direction according to the gear prompt on the shift handle when it is pushed forward or backward to the first order and the shift conditions are met; 3