BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Starting and Driving

Starting and Driving 161 Transmission gear display* When "D" or "R" gear is selected and the vehicle is stationary, do not run the engine at high speed. Always apply the parking brake until you are ready to drive away, remember that once the drive gear is selected, the automatic vehicle will drive slowly for­ ward or backward. Do not keep the vehicle stationary with the drive gear selected and the engine already running (always select "N" gear if you need to idle for a long time). When driving on slippery roads, ve­ hicles should start in snow mode. Ac­ cording to different models, the specific operations are as follows:

after the vehicle stops completely, put the gear lever into D gear, press the The driver must carry the remote key when leaving the car. Other­ wise, the panssenger in the vehicle can start the engine or turn on the electrical equipment accidentally, resulting in serious personal injury or death. When parking the vehicle, you must exert parking brake. If the vehicle is stopped, no one shall be left in the vehicle, otherwise it may inad­ vertently release the parking brake and make the vehicle move. When parking or stopping with the engine running, be careful not to press the accelerator pedal for a long time. Otherwise, the engine or exhaust emission system may overheat and cause fire.

Do not park the vehicle near flam­ mables and explosives. Park the vehicle in the proper direction. Do not let the exhaust gas blow out the plants, causing damage to the green belt. WARNING On vehicles equipped with automatic transmission, the gear display in the combination instrument will display the current gear information of the transmission. The gear character on the shift panel or the shift handle has the gear display function, that is, when the transmission is in a certain gear, the gear character will be illuminated, highlighted or discolored with the gear.

When the transmission and the shift lever are in any gear of the manual mode, the M, + and - gear characters are illuminated or highlighted or changed color with the gear. How to use automatic transmission 3 The following information is particularly important for drivers unfamiliar with vehicles equipped with automatic transmissions. button on S or center console, enter the sport or snow mode, and slowly step on the accelerator to start driving; After the vehicle stops completely, put the gear lever into D gear, press the M button on the center console, enter the modes of snow, sports, comfort, ECO, etc., and slowly step on the accelerator to start driving.

Start The engine can only be started when the shift lever is in "P" or "N". Before starting the engine, press the brake pedal.