BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Starting and Driving

Starting and Driving 162 Push the gear lever to the reverse gear Transmission P emergency unlocking When the vehicle is running, please do not put into "P" or "R" gear, oth­ erwise it will seriously damage the transmission. When the vehicle is driving, espe­ cially at idle speed, please do not slide in neutral. When the vehicle is parked for a long time, please put on "P" gear and use it with the parking brake. Attention 1. Stop the vehicle firmly. 2. Press the brake pedal and press the If the transmission cannot switch from "P" to another gear normally, the transmission "P" can be forcibly unlocked by emergency unlocking of the transmission.

The trans­ mission emergency unlocking handle is ar­ ranged in the engine compartment or under the driver's seat in the front. unlock button of the shift handle to shift the shift lever into the "R" position. 3. After entering the "R" gear, slowly release the brake pedal, and the vehicle will run in reverse gear. 3 When driving in reverse gear The backup signal lights come on. Reversing rearview system is activated automatically and the reversing image appears on the multimedia display (for some vehicle models). When the parking sensor is activated, it will sound an alarm with different frequencies when approaching an ob­ stacle (see "Parking Sensor System" on page 181).

Special circumstances of limited use of transmission function When the hardware, CAN communication, or TCU operation of the transmission fails, the vehicle function is restricted, and the corresponding limping mode is entered (the phenomenon that the vehicle cannot nor­ mally rise and fall, or is fixed in a specific gear, etc. may occur), and a warning is giv­ en on the instrument through the gearbox fault indicator light or text. The vehicle can continue to drive. It is recommended to re­ pair it as soon as possible.