Brake system 169 When driving on rainy days and slippery roads, the vehicle speed should be controlled to prevent slippage; when encountering water, the vehicle should be passed at a low speed and a uniform speed. After passing through a road with deep water, the brake pads and brake discs will be soaked in water, which will affect the braking effect. It is necessary to lightly step on the brakes a few times to keep the brake parts dry and restore performance. When driving on salted roads, if the brakes have not been applied for a long time, the braking action will be delayed and lagged. To resolve it, it is necessary to eliminate the salt layers on the brake discs and brake linings. 3.
Plateau environment Because of the high mountains and long slopes in plateau areas, the brakes are used frequently and for a long time, and often work continuously under forced dynamic conditions, these factors will make the braking effect worse. Therefore, we suggest that the vehicle should not slide in neutral and avoid frequent braking when going downhill. Try to use low gear to control the vehicle speed through the braking effect of the engine itself, which can reduce the working intensity of the wheel brake and reduce the brake temperature.
When using engine braking, the lower the transmission gear, the higher the engine speed, the greater the drag force, and the more obvious the braking effect. The air in plateau area is thin and the air pressure is low, which is different from the atmospheric pressure in plain and has different boosting effects.
In a plateau area, because the atmospheric pressure acting on the diaphragm of the brake booster per unit area is less than a standard atmospheric pressure force, the brake booster will become smaller and the time for producing the same boosting effect will become longer, which is a normal physical phenomenon, so it is necessary to apply greater brake pedal force when braking in the plateau area. When braking is needed, do not slam the brake pedal many times, but keep your feet on the brake pedal and control the brake pedal force to ensure the braking effect. 4.
Snow and ice weather Because of the low friction coefficient of ice and snow road surface, the braking distance will be greatly prolonged during braking, and the braking distance will raise with the raise of vehicle speed. Therefore, special attention should be paid to controlling the vehicle speed when driving on ice and snow road surface, and a large safe distance should be kept from the front vehicle or the side vehicle. No coasting with the Neutral position is permitted when driving on icy and snowy road surfaces. 5.
Surface rust If the vehicle is parked for a long period of time or you have not operated the brake system for a long period of time, the brake disc may become rusty and the lining may become dirty. We recommend that you apply the brakes repeatedly to clean the brake discs when the vehicle is moving. 3