Brake system 173 Automatic release of electronic parking: First, make sure the door is closed and the driver fastens his seat belt. From P gear or N gear to D gear or R gear, press the accelerator, and the electronic parking will be automatically released. ABS (anti-lock braking system) When the start / stop button is in the "off" state, if the electronic parking is in the released state, the parking can be realized by pulling up the electronic parking switch for 3 seconds. When the yellow indicator light on the combination instrument is on, it indicates that the electronic park ing system is faulty. Please contact the authorized dealer of BAIC for vehicle maintenance.
Attention The anti-lock braking system (ABS) prevents the wheels from locking when the vehicle is braking, which will ensure the vehicle's maneuverability and directional stability when braking. The purpose of ABS is to improve the active safety during driving. ABS will automatically adjust the brake pressure of each wheel. Before the wheel is about to lock up, the braking pressure will automatically decrease, and then raise the braking pressure until the wheel is about to lock up. The braking system's electronics get a signal from the wheel speed sensor, which accurately contains the time the wheel rolls.
This information is processed continuously in order to adjust the brake pressure as accurately as possible. The braking pressure can be adjusted up to 12 times per second, but the ABS cannot be expected to shorten the braking distance in all cases. For example, on gravel roads or smooth roads that have just snowed, even if you drive carefully and slowly, the braking distance may still belong. Attention Make sure that the driver's seat belt is fastened, otherwise the automat ic release function of electronic parking cannot be realized.
If the driver does not fasten the seat belt, the display of the combi nation instrument prompts "Please fasten the driver's seat belt to re lease the electronic handbrake". 3