Brake system 175 ABS system routine maintenance Excessive water content of brake fluid will not only cause poor braking due to vaporization of water, but also corrode the brake system and lead to degra dation of ABS performance. Therefore, brake fluid should be replaced regularly, generally at least once every two years. When the ABS warning light has the fol lowing conditions: 1. Continue to light up 2. Light up for a long time while driving 3. When the start / stop key is turned from After the ABS system fails, the normal braking system will work normally and will not be affected by the partial loss of ABS function, but the braking dis tance will be correspondingly longer.
WARNING ABS is composed of mechanical-electrical integration components, which have high working reliability and usually do not need regular maintenance. Pay attention to the following points to help improve the performance of the system and further reduce the failure rate of the system: ECU of ABS is composed of precise electronic parts, and electronic parts are easily damaged by strong collision and knocking. Therefore, ECU should be avoided from collision as much as possible. Do not let oil contaminate the electrical connectors of ABS system, especially metal terminals, so as to avoid poor electrical contact.
Do not contaminate the wheel sensor with oil or other sundries, especially near the gear ring position. 3 "off" to "run", the ABS warning light on the combination instrument will not be on. It must be checked and repaired in time. Before using the braking system before troubleshooting, you must pay attention to controlling the braking intensity to avoid wheel locking.