Brake system 180 3. When the driver makes the vehicle AUTOHOLD automatic parking function * 3. If the accelerator is not stepped on for speed over 35km/h through the accelerator pedal, the HDC function will stop working and be in a standby state; when the vehicle speed continues to increase over 60km/h, the HDC function will be completely withdrawn, and the HDC light of the instrument will be off, and the HDC function will be in a closed state. 4. When the "yellow HDC light" on the more than 3 minutes, it will switch to EPB mode and the EPB red parking light will illuminate. The automatic parking function can help the driver start more comfortably on slopes.
After releasing the brake pedal, the system continues to maintain braking, so that the driver has enough time to step on the accelerator pedal to start, so as to reduce the impact of sliding slope. Auto park function OFF Press the "AUTOHOLD" switch, the auto matic parking function is turned off, and the switch indicator light is off. 3 Forced exit of automatic parking func tion combination meter lights up, it means that the HDC function is disabled. Please contact the special dealer of BAIC for inspection and repair as soon as possible.
RMI Roll Movement Intervention* Automatic parking function on When the engine is running, the driver's side door is closed, the seat belt is fas tened, and the "autohold" switch is pressed, the automatic parking function is turned on, and the switch indicator light is on. 1. Unfasten the seat belt or open the driver's door or turn off the engine, the AUTOHOLD function will automatically exit.
If the AUTO HOLD function has been Automatic parking function activated activated, unfasten the seat belt or open the driver's door or turn off the engine or press the "AUTO HOLD" switch without applying the brake, then EPB electronic parking is performed, the green indicator light of the combination instrument goes out, and the red indicator light of electronic parking lights up.
When the vehicle starts after the body roll or the wheel height from the ground exceeds a certain limit, or the driver's driving direction exceeds a certain limit, which may cause the vehicle to roll over, the RMI Roll Movement Intervention will reduce the risk of rollover by braking the wheels and reducing the engine torque. 1. Start the engine, close the driver's door, fasten the seat belt, after the "AUTO HOLD" function is turned on, press the brake until the vehicle speed is zero, the automatic parking function is acti vated, and the green light of the combi nation instrument lights up; 2.
Lightly step on the accelerator, the parking is automatically released, and the green indicator light of the combination instrument goes out; Automatic parking function automatical ly exits After the AUTO HOLD function is activated, put into D gear or R gear, and press the