BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Spare tire and in-vehicle tool

Spare tire and in-vehicle tool 258 Using the jack improperly can cause serious injury. Only place the jack on solid and level ground. Only use your jack to jack up your vehicle. Do not use your jack to jack up other weight or vehicle. Do not start the engine when using the jack, otherwise, an accident will occur. To lessen the risk of personal inju­ ry, do not put any part of your body under the vehicle when the vehicle is on the jack. Place the appropriate protective support under the vehicle before getting under the vehicle.

WARNING After using the jack, put it back in place, and pay attention to the support­ ing angle of the jack, so as to avoid failing to put the jack into the installa­ tion box. Attention 5 4 WARNING 6 The wheel nuts must be tightened correctly according to the specified tightening torque, otherwise, the nuts may loosen when the vehicle is running, which will easily lead to traffic accidents. Fasten the wheel nut with the wheel assembly disassembly wrench provided with the vehicle, but the torque value cannot be guaranteed.

Control the vehicle speed reason­ ably during driving to avoid rapid acceleration and emergency brak­ ing, and go to a professional place as soon as possible to check and ensure that the wheel fixing nut reaches the tightening torque. The torque of the wheel nut is 140 ± 10 N·m. 1 2 3 The on-vehicle tool kit includes: 1. Special wrench for jack 2. Special wrench extension rod for jack 3. Wheel assembly removal wrench 4. Front windshield fixing strap 5. Front windshield fixing strap fixing ring 6. Wheel lock button (The reflective vest is arranged in the on- vehicle tool bag and on the second row of seat carpet) 5