BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Spare tire and in-vehicle tool

Spare tire and in-vehicle tool 260 Loosen the wheel nuts Vehicle lifting Only loosen each wheel nut 1 turn when the vehicle is on the jack. It can be loosened with the wheel assembly wrench provided with the vehicle. Tip 1 2 3 4 Before jacking up the vehicle, be sure to loosen the nuts on the wheels. Turn the wheel nuts anticlockwise to loosen them. In order to obtain the maximum torque, insert the nut into the wrench as shown in the figure above, hold the end of the wrench handle and pull it upward. Be careful not to let the wrench disengage the nut. Do not remove the nuts yet; just unscrew them by one cycle. Place the jack at the correct jacking point.

Make sure the jack is placed on level and solid ground. 5