Spare tire and in-vehicle tool 263 Instructions for wheel replacement Tighten the wheel nuts evenly in the order shown in the figure. After installing the wheels, check the tightening torque of wheel nuts at the authorized dealer of BAIC as soon as possible. If the nut is corroded or difficult to screw when replacing the wheel, the nut must be replaced when checking the tightening torque of the wheel nut and the bolt thread must be cleaned. Attention If your spare tire is over six years old, only use it in emergency with extra care. Check the tire pressure as soon as possible after installing the spare wheels to make it within the speci fied range.
WARNING Install the flat tire into the flat tire well timely. Clean the tools and store the tools in the tool kit case. Check the wheel nuts torque as soon as possible. The damaged wheel must be repaired as soon as possible. The emergency spare wheel or the re placed wheel must be reliably fixed on the spare wheel rack. Attention WARNING Threads on wheel nuts and hubs must be kept clean, and there must be no attachments such as grease. 5