BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Spare tire and in-vehicle tool

Spare tire and in-vehicle tool 262 Spare tire installation 3 1 6 5 2 4 When installing the wheel nuts, tighten the wheel nuts by hand as far as possible. Try to push the wheel backward to see whether it can be tightened further. Turn the jack handle clockwise to lower the vehicle. Tighten the wheel nut by the wheel assembly wrench. Do not use other tools or any lever tools other than hands, such as hammers, pipes or feet, and make sure the wrench is tightly fitted to the nut. Tighten the wheel nuts evenly in the order shown in the figure. Align the mounting hole of the spare wheel with the mounting hole on the brake disc.

5 Attention Before installing the wheel, please clear all corrosive substance off the installation surface with a wire brush.