BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Cabin

Cabin 064 Environment information interface 2. Relative height The altitude reference value converted from the difference between the atmospheric pressure detected in real time at the position of the vehicle instrument and the standard atmospheric pressure. The slope display is based on the ac­ celeration sensor signal conversion. The deviation is large during the move­ ment. Please refer to the displayed value when the vehicle is stationary. It is for reference only.

Tip 2 2437 m Tip Tip Since the real-time atmospheric pres­ sure is strongly related to the changes of environmental factors such as air temperature and wind speed, the rela­ tive altitude value is not recommended for altitude measurement. It is only used to display the real-time relative height change during vehicle driving. The geomagnetic principle compass is greatly affected by a magnetic field. If it passes through areas with complex magnetic fields or considerable elec­ tromagnetic interference, the direction indicated by the compass will be inac­ curate. After the magnetic field is sta­ ble, it is necessary to re-calibrate the compass. 110.1 hpa 1.

Atmospheric pressure The environment information interface displays the atmospheric pressure of the current vehicle position. 2. Compass Display the direction of the front. The electronic compass used in this vehicle is based on the principle of geomagnetic positioning and can vaguely indicate eight directions. The display directions include: North, northeast, East, Southeast, South, southwest, West and northwest, and the bearing range is 0-359 °.