BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Cabin

Cabin 065 Vehicle alarm information interface Brake fluid level low (-) Low oil pressure The water temperature of the engine is too high.

Engine knock caused by oil problem* Transmission fault * Limited transmission function* ABS system fault Brake system fault ESP system fault * Downhill assist system fault* Automatic parking system fault Please fasten the driver's seat belt to release the electronic handbrake Please step on the brake pedal to re­ lease the electronic handbrake EPB system fault Driving recorder failure * Driving recorder SD is not inserted, please insert SD card * SD card failure, please replace SD card * SD card is not formatted, please format SD card * Please view parking surveillance video * The photo storage folder is full, please delete the photo * The emergency video recording space of driving recorder is full, please clean it up!

* Rapid tire leakage * High tire temperature * Tire high pressure * Low tire pressure * Tire pressure sensor missing* Insufficient power of tire pressure sen­ sor* Tire pressure sensor failure* Tire pressure system failure* One-button startup system failure No smart remote key found Please press the brake to start Please switch to P/N gear to start Please step on the clutch to start Please switch to P gear and stop ABS system fault! 2 Press“ ”button to exit The figure shows an example of the ABS system fault alarm interface. In addition to this interface, the following faults will be alarmed:

Left turning signal light failure Right turning light fault Left low beam light fault Right low beam light fault Fuel sensor fault Airbag fault