Industrial — CODE 65 XX — ENGINE RATING HIGH

WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL CODE 65 XX — ENGINE RATING HIGH Main code 65 indicates the vehicle’s engine horsepower/governor speed rating is too high. This code is set only when computer-controlled engines are used. Code 65 means the engine computer is able to tell the transmission, the engine horsepower and/or governor speed is beyond the transmission rating or does not match the transmission shift calibration. A. Active Indicator Clearing Procedure: Power down B. Troubleshooting When a code 65 is set, no shifts out of the current range are allowed. It is possible the transmission calibration selected for this engine is improper.

Contact local Allison Transmission Division distributor for assistance in selecting a proper calibration. If the engine is beyond transmission ratings, contact the vehicle OEM for correction. The local ATD regional representative may also be contacted for assistance. This code cannot be cleared until the proper level engine is installed or the transmission is properly calibrated. Copyright © 2001 General Motors Corp. 6–99