WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL APPENDIX N — DIAGNOSTIC TOOL INFORMATION Pro-Link ® 9000 Diagnostic Tools The WTEC III system will require new Pro-Link ® 9000 hardware for reprogramming and diagnostics. The following is a list of required updates to the current Pro-Link ® 9000 hardware: Hardware Tool P/N MultiProtocol Cartridge (MPC) J38500-1500 Reprogramming PCMCIA Card* J38500-1700 Diagnostic Card* J38500-1800 * Requires J38500-1500 to function Limited diagnostic information for the WTEC III system can be accessed through the current WTEC II Pro-Link ® 9000 hardware.
This diagnostic information will however be limited to that information that is common to the WTEC II and WTEC III systems. Access to information described in this SIL can only be accessed through either the WTEC III Diagnostic Cartridge or by updating the current WTEC II Diagnostic Cartridge with the PROM update kit or the WTEC III Reprogramming Cartridge. The MultiProtocol Cartridge (MPC) and the Reprogramming Card are required to modify customer constants and alter Calibration packages within the WTEC III ECU. After completing an ATD-approved training class, those ordering a reprogramming cartridge are required to submit a copy of their completion certificate with their order.
This serves as proof of eligibility to purchase these items. Training is available from ATD and ATD distributors. Copyright © 2001 General Motors Corp.