Industrial — APPENDIX P — INPUT/OUTPUT FUNCTIONS

WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL C. PTO ENABLE — USING MODE BUTTON USES: Permits PTO to be engaged only when engine speed and output speed are in allowable range and throttle is low. Also disengages PTO if speeds are exceeded. VARIABLES TO SPECIFY: Minimum and maximum engine speed for engagement, maximum engine speed for allowable operation, minimum and maximum output speed for engagement, maximum output speed for allowable operation. VOCATIONS:

Various (with usage of PTO) OPTIONAL CUSTOMER-FURNISHED VIW CONNECTOR(S) SWITCHED POWER V V-22 WIRE 112 PTO ENABLE DASH LIGHT PTO PRESSURE SWITCH ECU NC SELECT F2 COM PTO NO F3 S R N MODE MODE BUTTON D2 For Shift Selector wiring requirements, see installation drawing AS07-27 (see SA2978 WTEC III Controls and General Information) D Relay shown de-energized VIM V04859.01 Figure P–5. PTO Enable — Using MODE Button Copyright © 2001 General Motors Corp. APPENDIX P — INPUT/OUTPUT FUNCTIONS WARNING! These schematics show the intended use of the specified controls features which have been validated in the configuration shown.

Any miswiring or use of these features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING OR UNINTENDED USE OF THESE FEATURES.