Industrial — APPENDIX P — INPUT/OUTPUT FUNCTIONS

WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL V. REVERSE ENABLE SWITCHED TO POWER USES: Provides for a separate instrument panel-mounted switch which must be pressed simultaneously with the REVERSE button to achieve Reverse. VARIABLES TO SPECIFY: None VOCATIONS: European transit buses and tour buses Figure P–23. Reverse Enable Switched to Power Copyright © 2001 General Motors Corp. P–23 APPENDIX P — INPUT/OUTPUT FUNCTIONS WARNING! These schematics show the intended use of the specified controls features which have been validated in the configuration shown.

Any miswiring or use of these features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING OR UNINTENDED USE OF THESE FEATURES. WARNING! If this function is enabled in the shift calibration, the function MUST be integrated into the vehicle wiring. If the function is available in the shift calibration but will not be used in the vehicle, it MUST be disabled in the calibration.

ECU SEE TABLE A MOMENTARY SWITCH V SWITCHED POWER SEE TABLE A REVERSE ENABLE S OPTIONAL CUSTOMER-FURNISHED TABLE A VEHICLE INTERFACE OPTION 1 PIN S-11 WIRE 119 WIRING CONNECTOR OPTION 2 PIN V-13 WIRE 118 V07120 PIN S-11 WIRE 119 PIN V-13 WIRE 118