WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL AA. SERVICE BRAKE STATUS USES: Indicates to the ECU whether vehicle braking is being provided by the retarder or vehicle brakes, so that the transmission controls can be adapted accordingly. VARIABLES TO SPECIFY: None VOCATIONS: Various. This function is required for retarder-equipped transmissions. P–30 Copyright © 2001 General Motors Corp. APPENDIX P — INPUT/OUTPUT FUNCTIONS WARNING! These schematics show the intended use of the specified controls features which have been validated in the configuration shown.
Any miswiring or use of these features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING OR UNINTENDED USE OF THESE FEATURES. BRAKE PEDAL SWITCH WIRE 137 V-29 SERVICE BRAKE STATUS V CLOSED = BRAKES ON WIRE 161 V-31 NOTE: If vehicle is equipped SIGNAL RETURN with air brakes, this switch OPTIONAL should close at 2–5 psi. CUSTOMER-FURNISHED ECU VIW CONNECTOR(S) S V07171 BRAKE PEDAL SWITCH WIRE 137 V-29 SERVICE BRAKE STATUS V CLOSED = BRAKES ON WIRE 161 V-31 NOTE:
If vehicle is equipped SIGNAL RETURN with air brakes, this switch OPTIONAL should close at 2–5 psi. CUSTOMER-FURNISHED ECU VIW CONNECTOR(S) S V07171