Industrial — APPENDIX P — INPUT/OUTPUT FUNCTIONS

WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL B. SUMP/RETARDER TEMPERATURE INDICATOR USES: Turn on dash indicator when transmission sump or retarder-out temperature has exceeded specified limits. VARIABLES TO SPECIFY: None VOCATIONS: Various SWITCHED POWER V V-19 WIRE 105 SUMP / RETARDER TEMPERATURE TRANSMISSION TEMP OPTIONAL CUSTOMER-FURNISHED VIW CONNECTOR(S) ECU If current in lamp circuit exceeds 0.5 amp, ground lamp through a relay TRANS TEMP NC S COM NO SWITCHED POWER WIRE 105 NOTE: If transmission is not equipped with a retarder, the output is activated by sump temperature alone. V04892 Figure P–48. Sump/Retarder Temperature Indicator Copyright © 2001 General Motors Corp.

P–51 APPENDIX P — INPUT/OUTPUT FUNCTIONS WARNING! These schematics show the intended use of the specified controls features which have been validated in the configuration shown. Any miswiring or use of these features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING OR UNINTENDED USE OF THESE FEATURES.