Isuzu — Chart 6 (DTC 34/C0234) Abnormal Motor Rotation

5A4-42 ANTI-LOCK BRAKE SYSTEM (ABS) Chart 4 (DTC25/C0225) Exhaust Brake Cut Circuit Abnormality Chart 5 (DTC33/C0233) Motor Drive Circuit Abnormality Chart 6 (DTC 34/C0234) Abnormal Motor Rotation Replace EHCU. Step Action Value(s) Yes No 1 1. Disconnect EHCU connector. 2. Start the engine. 3. Measure voltage between EHCU terminals 8 and 1. Is the voltage within the specified value? 12 V vehicle: More than 5 V 24 V vehicle: More than 10 V Go to Step 2 Go to Step 4 2 Measure voltage between EHCU terminals 7 and 1. Is the voltage within the specified value? 12 V vehicle: More than 5 V 24 V vehicle: More than 10 V Go to Step 3 Go to Step 6 3 Short EHCU terminal 8 to 1.

Is the voltage at EHCU terminal 7 less than 1.5 V? - Replace the EHCU. Replace the exhaust brake cut relay. 4 Measure resistance of the exhaust brake cut relay coil. 12 V vehicle: 60-120 ohms 24 V vehicle: 210-310 ohms Go to Step 5 Replace the exhaust brake cut relay. 5 Measure voltage at coil power side of relay box connector. (key at on position) Is the voltage within the specified value? 12 V vehicle: 10-16 V 24 V vehicle: 20-32 V Check harness between EHCU terminal 8 and exhaust brake cut relay. Repair as necessary. Repair harness and/or power line. 6 Turn the exhaust brake switch on. Does the exhaust brake indicator light turn on? - Repair harness of EHCU terminal 7.

Go to exhaust brake diagnosis procedure. Step Action Value(s) Yes No 1 1. Disconnect EHCU connector. 2. Measure voltage between EHCU terminals 24 and 1. Is the voltage within the specified value? 12 V vehicle: 10-16 V 24 V vehicle: 20-32 V Go to Step 2 Go to Step 3 2 Measure continuity between EHCU terminals 23 and 1. Is there continuity? - Replace the EHCU. Repair the harness. 3 Check the ABS fusible link (12V: 60A, 24V: 40A). Is it okay? - Repair the harness. Replace the ABS fusible link (12V: 60A, 24V: 40A).