Isuzu — Chart 11 (DTC53/C0253) RL Speed Sensor Circuit Abnormality

5A4-44 ANTI-LOCK BRAKE SYSTEM (ABS) Chart 11 (DTC53/C0253) RL Speed Sensor Circuit Abnormality Step Action Value(s) Yes No 1 1. Disconnect EHCU connector. 2. Disconnect RL speed sensor connector. 3. Measure continuity between EHCU terminal 22 and positive side of chassis harness connector connected to RL speed sensor. Is there continuity? - Go to Step 2 Repair the harness. 2 Measure continuity between EHCU terminals 22 and 1. Is there continuity? - Go to Step 3 Repair the harness. 3 1. Start the engine. 2. Measure voltage between EHCU terminals 22 and 1. Is the voltage within the specified value? Less than 2 V Go to Step 4 Repair the harness.

4 Measure continuity between EHCU terminal 34 and positive side of chassis harness connector connected to RL speed sensor. Is there continuity? - Go to Step 5 Repair the harness. 5 Measure continuity between EHCU terminals 34 and 1. Is there continuity? - Go to Step 6 Repair the harness. 6 1. Start the engine. 2. Measure voltage between EHCU terminals 34 and 1. Is the voltage within the specified value? Less than 2 V Go to Step 7 Repair the harness. 7 Check the RL speed sensor (Refer to chart C- 1-3 or TC-1). Does the DVM display a voltage within the specified value? 0.2-4.5 V Replace the EHCU. Replace the RL speed sensor.