ANTI-LOCK BRAKE SYSTEM (ABS) 5A4-45 Chart 12 (DTC54/C0254) RR Speed Sensor Circuit Abnormality Step Action Value(s) Yes No 1 1. Disconnect EHCU connector. 2. Disconnect RR speed sensor connector. 3. Measure continuity between EHCU terminal 21 and positive side of chassis harness connector connected to RR speed sensor. Is there continuity? - Go to Step 2 Repair the harness. 2 Measure continuity between EHCU terminals 21 and 1. Is there continuity? - Go to Step 3 Repair the harness. 3 1. Start the engine. 2. Measure voltage between EHCU terminals 21 and 1. Is the voltage within the specified value? Less than 2 V Go to Step 4 Repair the harness.
4 Measure continuity between EHCU terminal 12 and positive side of chassis harness connector connected to RR speed sensor. Is there continuity? - Go to Step 5 Repair the harness. 5 Measure continuity between EHCU terminals 12 and 1. Is there continuity? - Go to Step 6 Repair the harness. 6 1. Start the engine. 2. Measure voltage between EHCU terminals 12 and 1. Is the voltage within the specified value? Less than 2 V Go to Step 7 Repair the harness. 7 Check the RR speed sensor (Refer to chart c- 1-4 or TC-1). Does the DVM display a voltage within the specified value? 0.2-4.5 V Replace the EHCU. Replace the RR speed sensor.