Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE WHEN REQUIRED CLEAN INSIDE OF COOLING SYSTEM WARNING *1: When using Komatsu Supercoolant (AF-NAC), there is no need to use a corrosion resistor. When no corrosion resistor is used, use the special cover (600-411-9000). Please consult your Komatsu distributor about the method of installing. When using corrosion resistor, use Komatsu genuine corrosion resistor. If you use another corrosion resistor, it may cause serious problems such as corrosion of the engine and parts of the cooling system that use light metals such as aluminum. The coolant has the important function of preventing corrosion as well as preventing freezing.

Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours. As a basic rule, we do not recommend the use of any coolant other than Komatsu genuine supercoolant (AF-NAC). If you use another coolant, it may cause serious problems, such as corrosion of the engine and aluminum parts of the cooling system. 4 - 21 Immediately after th e engine is stopped, the coolant is at a high temperature and th e radiator is under high i nternal pressure.

If the c ap is r emove d to drain th e coolant in this conditio n, there is a hazard of burns. Wait for the temperature to go down, then turn th e cap slowly to release the pressu re before removing it. Cleani ng is c arried out with the engine ru nning. When s tanding up or leaving the operator's seat, set the wor k equipment lock lever a nd th e parkin g brake le ver to the L OCK position. For de tails o f starti ng the engi ne, see "C HECK BEFOR E STARTING ENGINE , ADJUS T (PAGE 3-73)" and "STARTING ENGINE (PAGE 3-95) " in the OPERATIO N section. Never enter front th e machine when the e ngine is running. There is danger of t ouching th e fan.

Stop the machine o n level gro und whe n cleaning or changing the coolant. Clean th e inside of t he coolin g system, change the coolant according t o the t able below Antifreeze coolant Interval for cleaning inside of cooling system and changing antifreeze coolant Precautions for use Komatsu supercoolant (AF-NAC) Every two years or every 4000 hours whichever comes first 1*