Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE Mixing rate of water and antifreeze -40 -40 122.0 88.0 32.2 23.3 58 WARNING go down. 4 - 22 To maintain the antico rrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant . between 30% and 68% When deciding the rati o of antifreeze to water, chec k the lowest t emperature in the past, an d decide from the mixing table given below. stimate and temperature about 10°C (18°F) lower when deciding the mixing ratio. nds on the ambient temperature, but it should always be a minimum of 30% by volume t of coolant x 100).

It i s actually better to e stimate and temperature ab out 10°C (18 °F) lower when deciding th The mixing ratio depe (antifreeze/total amoun Even in areas where it is not necessary to prevent fr eezing, use Supercoolant (AF-NAC) at a mixing ratio of at least 30% to prevent corrosi on of the cooling system. The freezing temperatu re of undiluted antifreeze is -15°C (5°F). Do not store undiluted ant ifreeze at a temperature of below -15°C (5°F). Min. atmospheric temperature °C Above -10 -15 -20 -25 -30 -3 °F Above 14 5 -4 -13 -22 -3 Amount of antifreeze liter 63.0 75.5 86.0 96.5 105.0 113 US agl 16.6 20.0 22.7 25.5 27.7 30 liter 147.0 134.

5 124.0 113.5 105.0 96 US agl 38.8 35.5 32.8 30.0 27.7 25 Volume ratio (% ) 30 36 41 46 50 5 Antifreeze is flammabl e, so keep it away from flame. Antifreeze is toxic. Wh en open the drain valve, be care ful not to get w ate r containing antifreeze on you. If it gets in your eyes, flush your eyes with la rge amount of fresh water and s ee a doctor at once. When changing the co olant or draining the coolant fro m the radiator before carrying out repairs, a sk a specialist company to handle any coolant co ntaining antifreeze, or contact your Komatsu distributor. Antifreeze is toxic, so never pour it into ace.

drainage water ditches or drain it onto the ground surf Use antifreeze and app ropriatewater for diluting. (fo r details, see "COOLANT AND WATER FOR DILUTION (PAGE 4-6)") an antifreeze density gauge to control the mixing proportions. hose capacity is larger than the specified coolant volume to catch drained coolant. ply antifreeze coolant and water. We recommend use of an antifreeze density gauge to control th e Prepare a container w hose capacity is larger than t he specified coolant volume to catch d Prepare a hose to sup ply antifreeze coolant and w . Stop the engine an d wait for the temperature o f the coolant