. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE into contact with the filter holder, then tighten a further 3/4 to 1 turn. 4 - 59 Clean th coat the thinly w When i e filter hol packing ith grease nstalling t der, fill surfac ), then he filte the new filter ca e and thread wit install the filter r cartridge, brin rtridge with engine oi h engine oil (or coat cartridge. g the packing surfac 9. filler por t (F) until t he oil l evel is between the H and L marks o the dips 10. Run the engine at idling for a short time, then stop the e ngine , and check that the oil le vel is between the H and L marks on the di pstick.
For details, see "CHECK OIL LEVE L IN ENGINE OIL PAN, ADD OIL (PAGE 3-79)". Even if the machi ne has not been opera ted for 500 hours, the oil and filter cartridge mu st be replaced when the machin e has bee n operated for 12 mon ths. In the s ame way, even if the machine h as not been operated for 12 months, the oil an d filter cartridge must be replace d when th e machine has been o perated for 50 0 hour s.