Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE NOTICE 4. Clean the filter holder, coat the packing surface of the new filter cartridge thinly with oil, then install the filter cartridge to the filter holder. 4 - 65 Do not fill th e fuel filter c artridge with f Remov e cap (B) an d inst all the fuel filte 5. Whe n installing , tight en until the p acking surface contacts the s eal surface of the filter holder, then tight en it 3/4 of a turn. If the filter cartridge is tightened to o far, the p acking will b e damaged and this w ill lead to leakage of fu el. If the filter cartridge i s too l oose, fuel wi ll also leak from the packing, so always tighte n the correct amount. 6.

After filter cartridge (2) has bee n replaced wit h a new "PROCEDURE FOR BLEEDING AIR (PAGE 3-153) REMARK When on ly the filter cartridge is replac ed, it is suffficient t hat a ir bleeding is carried o ut for the filter head alo ne. But when th e fuel pipin g is re moved, air b leeding should als o be carried out for the inje ction pump air-bleeding valve.