Fuel 47 13. Start the engine. When the lubricating oil reaches its normal operating pressure, increase engine speed to high idle for one to two minutes to purge air from the system. 14. Check for leaks and shut down the engine. 47–03 Fuel Tank Band-Nut Tightening Hold each fuel tank band retention nut with a wrench while backing off its jam nut, then tighten the reten- tion nuts 30 to 35 lbf·ft (41 to 46 N·m). After the re- tention nuts have been tightened, hold each retention nut with a wrench while tightening its jam nut 30 lbf·ft (41 N·m). IMPORTANT: Do not overtighten. 122SD and Coronado 132 Maintenance Manual, February 2016 47/5