Frame and Frame Components 31 C 1 E 2 D 3 A F 09/02/2009 f311100 1. Jam Nut 2. Adjustment Bolt 3. Grease Zerk Fig. 7, Jost Fifth Wheel G H 9.3 Check the locking mechanism for proper operation. B If the plungers will not release, check the air cylinder or plunger adjustment. 09/01/2009 f311099 If the plungers are loose, check the plunger adjustment and the plunger springs for proper compression. Replace if needed. A. Checking for fore/aft play. B. Rotating tester in lock. C. Engage hook. D. Pull/push handle fore/aft. E. Check for movement of kingpin in lock. F. Disengage hook. G. Push/pull handle inboard/outboard. H. Rotate lock tester. 9.4 The outboard slider assembly requires no adjustment.
If the plungers are loose, in- spect and replace locking mechanism parts as needed. Fig. 6, Jost Fifth Wheel Adjustment 9.5 The inboard slider is adjustable for frame width and plunger engagement. For ad- justment, refer to the fifth wheel installa- tion instructions. 9.1 Check the bracket for any cracks or miss- ing and damaged parts. 9.2 Inspect the locking plungers for full en- gagement. 10. Replace cracked, worn, or damaged parts with new parts. Replace all loose mounting bolts with 5/8–11 SAE grade 8 bolts, grade C locknuts, and 122SD and Coronado 132 Maintenance Manual, February 2016 31/5