Frame and Frame Components 31 1 Grease #5213, Craftsman Chemical Co. #LTF 2, Mystic LP-200, or equivalent is recommended. 1 2 2 2 3 2 3 3 3 04/11/2011 f310884 4 1. Pull Handle 2. Jaw 3. Wedge 12/03/2010 f311135 Fig. 8, Fontaine Fifth Wheel 1. Release Handle and Spring 2. Grease Fitting 3. Yoke Tip 4. Locks 1 Fig. 10, Holland FW35 Fifth Wheel, Grease Lubrication Jost Lubricate the kingpin lock using a hand pump grease gun through the grease zerk on the skirt of the fifth wheel; see Fig. 7 . Apply a light oil to all moving parts. For sliding fifth wheels spray diesel fuel on the slide path of the base plate. NOTICE Do not use a power grease gun. The pressure will damage the lube line.
If the fifth wheel is not equipped with low-lube plates, apply a lithium-based grease with extreme pressure (EP) additive to the trailer contact surface of the fifth wheel. 12/03/2010 f311136 Use a light oil (such as SAE 10W or 20W motor oil) to lubricate the cam track and pivot. NOTE: If the fifth wheel is equipped with low-lube plates, the top plate only requires lubrication at the new product break-in stage. The low-lube plates re- quire no further lubrication. 1. Cam Plate Fig. 9, Holland FW35 Fifth Wheel, Oil Lubrication 122SD and Coronado 132 Maintenance Manual, February 2016 31/7