Freightliner — 122SD, Coronado 132

Suspension 32 Inspect the shock absorber for oil leakage. If the shock absorber is damaged or leaking, replace it with a new one. See Group 32 of the 122SD and Coro- nado Workshop Manual for replacement instructions. any of these conditions exist, replace the dam- aged parts. See Group 32 of the 122SD and Coronado Workshop Manual for instructions. NOTICE Failure to replace the suspension crossmember or gussets if they are cracked, worn, or otherwise damaged could result in damage to the vehicle chassis. 3. Without detaching the torque arms, attempt to move (by hand) each radius-rod end up, down, in, and out. If there is any movement, replace the torque arm.

If a torque arm needs to be re- placed, see Group 32 of the 122SD and Coro- nado Workshop Manual for instructions. 4. Inspect the weld seams between the torque arm tube and the shorter bushing tubes. If there are cracks, replace the torque arm. Do not weld the torque arm for any reason. f320465 11/27/95 Fig. 2, Direct-Acting Shock Absorber (front suspension shown) Rear Suspension Check Freightliner Spring Suspension 5. Inspect the rubber bushing ends. See Fig. 3 . Re- place the torque arm for any of the following rea- sons:

if there are gaps between the rubber bush- ing and the pin or outer steel sleeve; WARNING if either bushing end contacts a torque arm pin mounting bolt; Do not replace individual leaves of a damaged leaf spring assembly; replace the complete spring as- sembly. Visible damage (cracks or breaks) to one leaf causes hidden damage to other leaves. Re- placement of only visibly damaged parts is no as- surance that the spring is safe. Failure to replace a damaged spring assembly could cause an acci- dent, resulting in serious personal injury or prop- erty damage. if there are cracks in the bushing; if part of the rubber bushing extends be- yond the outer circumference of the outer bushing sleeve.

Replace worn, cracked, or damaged spring brackets. Failure to do so could result in bracket breakage, possibly leading to loss of vehicle con- trol and resulting in personal injury or property damage. 1. Inspect the forward and rear spring brackets and equalizer brackets for wear, cracks, and other damage. If any of these conditions exist, replace the damaged bracket(s). See Group 32 of the 122SD and Coronado Workshop Manual for in- structions. f320021a 05/27/93 2. Inspect the tandem-axle frame crossmember and gussets for wear, cracks, and other damage. If Fig. 3, Torque Arm Bushings 122SD and Coronado 132 Maintenance Manual, February 2016 32/2