Komatsu — STEERING MACHINE

OPERATION OPERATION TURNING TO LEFT WHILE TRAVELING FORWARD NOTICE If the lever is operated partially to the forward or reverse position and then is operated in the direction of turn, the machine may carry out a counterrotation turn, so operate the lever fully to the forward or reverse position. If the steering, directional and gear shift lever(1) is pushed for- ward and moved partially to the left (L), the machine will start to turn gradually. After that, the lever can be moved further toward the end of its stroke to give the desired turning radius.

REMARK If the steering, directional and gear shift lever(1) is pushed for- ward and moved partially to the right, the machine will start to turn gradually to the right. After that, the lever can be moved further toward the end of its stroke to give the desired turning radius. Do the same when traveling in reverse. CARRYING OUT COUNTERROTATION TURN TO LEFT NOTICE When carrying out a counterrotation turn, if the load is not equal on the left and right sides, the machine may carry out a pivot, so check the ground conditions and be careful not to hit any obstacles.

If the steering, directional and gear shift lever(1) is placed at the N (neutral) position and is operated partially to the left, the left and right tracks will rotate in opposite directions and the machine will carry out a counterrotation turn smoothly. If the lever is operated fully, the speed of the counterrotation turn will increase. REMARK When carrying out a counterrotation turn to the right, move the steering, directional and gear shift lever(1) to the right in the same way. 3-72