OPERATION OPERATION TURNING WHILE DESCENDING A SLOPE This machine (which can turn by counterrotation) does not cross-steer even when it descends a steep slope where it is driven down by its own weight or when it is pushed down by a towed machine on a slope. Accordingly, descend a slope as explained below. NOTICE Do not use the counterrotation turn on slopes. The load on the left and right sides will not be uniform, and the machine may turn sharply to one side. REMARK Cross steering means the phenomenon that the machine turns in the opposite direction to the actual steering direction.
WHEN TURNING TO THE LEFT GRADUALLY WHILE TRAVELING FORWARD If the steering, directional and gear shift lever(1) is pushed for- ward and moved partially to the left(L), the machine turns grad- ually to the left. (Does not become reverse steering) REMARK When making gradual turns to the right, push the steering, directional and gear shift lever(1) forward, and move it partially to the right. (Does not become reverse steering) Do the same when traveling in reverse. 3-73