SERVICE PROCEDURE MAINTENANCE CLEANING OR REPLACING OUTER ELEMENT 1. Open the left engine side cover. 2. Remove four clips(2) to remove dust cup(3). NOTICE Never remove inner element (5). If it is removed, dust will enter and cause an engine trouble. 3. Remove outer element(4). NOTICE When cleaning the dust cup, do not remove evacuator valve(6). 4. Clean the inside of the air cleaner body and dust cup. NOTICE The inner element must not be cleaned and used again. When replacing the outer element, replace the inner ele- ment at the same time. 5.
Direct dry compressed air (less than 0.69MPa (7kg/cm 2 , 99.4PSI)) to the outer element(4) from inside along its folds, then direct it from outside along its folds and again from inside. 1) Replace the outer element if it has been cleaned 6 times repeatedly or used throughout a year. Replace the inner element at the same time. 2) Replace both inner and outer elements when the dust indicator red piston appears soon after installing the cleaned outer element even though it has not been cleaned 6 times. 4-20