Komatsu — CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT

SERVICE PROCEDURE MAINTENANCE NOTICE When cleaning the dust cup, do not remove evacuator valve(6). 4. Clean the inside of the air cleaner body and dust cup. 5. Remove inner element(5), then install a new inner element immediately. 6. Set new outer element(4) and install dust cup(3), then secure them with clips(2). CAUTION When installing the dust cup, check O-ring(7). If the O-ring has any defect, replace it. 7. Return the red piston in the dust indicator(1) to its original position. 8. Close the left engine side cover. 4-22