HANDLING TOWING WINCH ATTACHMENTS, OPTIONS SLOW WINDING OUT 1. 1. When the winch control lever is moved from the N position to Slow reverse rotation position (3), the brake is released, the drum rotates slowly in reverse, and the wire rope is wound out. 2. 2. When stopping the slow winding-out operation, release the winch control lever. The lever is returned to the N position and the free brake is applied to stop the winding out of the wire rope. INCHING (BRAKE PARTIALLY APPLIED) If the winch control lever is pushed fully forward, it will enter FLOAT position (5), be held by the notch, and the brake will be kept fully released.
This is dangerous, so do not push the lever fully; if it catches in the notch, pull it back by hand. Use this operation when driving the machine forward without changing the position of the load hanging from the wire rope, or when lowering the load under its own weight. 1. When the winch control lever is moved from the N posi- tion towards position (4), the braking force on the drum is gradually reduced. Adjust the position of the control lever to match the weight of the load or the travel speed of the machine. If the lever is pushed too far forward, there is danger that the load will drop. 2. When stopping the inching operation, release the winch control lever.
The lever is returned to the N position and the free brake is applied to stop the inching of the wire rope. 6-14 WARNING