Komatsu — ADJUSTING

ATTACHMENTS, OPTIONS HANDLING TOWING WINCH FLOAT (BRAKE RELEASED) When removing or installing the wire rope, always wear thick leather working gloves. When winding out the wire rope under external force, do as follows. 1. 1. When the winch control lever is moved fully forward from the N position, it catches in the notch and is held in the FLOAT position. When this happens, the braking force on the drum is completely removed. To return the lever, pull it by hand. 2. 2. This operation enables the wire rope to be wound out under external force. REMARK Even when the lever is at the FLOAT (BRAKE RELEASED) position, the wire rope cannot be pulled by human force.

ADJUSTING ADJUSTING CLUTCH If any abnormality is found, please contact your Komatsu distributor for inspection and repairs. ADJUSTING BRAKE If the wire rope can be wound out from the drum when the winch control lever is at the N position, the brake is not working, so please contact your Komatsu distributor for inspection and repairs. ADJUSTING SLOW WINDING-OUT SPEED 1. Turn up the boot of the winch control lever. 6-15 WARNING