Komatsu — HANDLING WIRE ROPE

HANDLING TOWING WINCH ATTACHMENTS, OPTIONS 2. Loosen bolt (2). 3. Watch the rotation of the drum and move adjustment plate (1) to the optimum position. After adjusting, tighten bolt (2) to hold the adjustment plate in position. HANDLING WIRE ROPE If the wire rope is repeatedly tensed and slackened, it will rapidly become damaged, so check it for damage before and after operations, and replace it if it is in the following condition. G Wire rope with marked loss of shape, broken strands, or corrosion. G Wire rope that is twisted and has kinks. G Wire rope where the nominal diameter is worn more than 7%.

REMARK When replacing the wire rope, use a normal Z-lay seal type 19 wire, 6 strand lay 7 x 7 + 6 x S (19) core I.W.R.C. 6-16